1 / 2
24mm masking tape dispenser with magnetic mount — zdjęcie 1
1 / 2

24mm masking tape dispenser with magnetic mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of fns720's tape spool holder

Ocena
0 / 5
Polubienia
5
Pobrania
55
Wydruki
0
Wyświetlenia
498
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Share Alike

Only had 6x3mm magnets - allows for 10x (probably overkill)

No glue required - designed so it will be press fit

First ever remix 

Printed in PLA-CF 

0.16mm

5 walls 

15% gyroid infil

Supports on build plate only for magnet holes (Top Z distance 0.2mm)

Thanks so much to fns720 for original design https://www.printables.com/model/39635-redesigned-24-mm-masking-tape-dispenser-with-magne