Ender S1 raspberry pi camera clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clamp to mount the camera to the left side of the gantry.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update: I prefer the updated version, as it solves the issue where the 0 y offset cr-touch sensor blocks the view in the resting position. you can find it here: https://www.printables.com/model/641724-ender-s1-flat-cable-and-raspberry-pi-camera-holder
A clamp to mount the camera to the left side of the gantry. The camera is oriented in such a way that the top of the image aligns approximately with the X-gantry, This allows you to see a bigger portion of the model if you are printing higher.
Left side of the gantry is somewhat inconvenient, since this is the ‘rest’ position of the extruder, meaning it blocks the view. However I needed to route the cable on this side, hence I made this model.
If you decide to make this model, let me know what you thought of it! I would appreciate some feedback and a make!