1 / 3
Trammel Ruler
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
A tool to make straight lines along a straight edge at an offset.
Easy print. See orientations below
Fully customizable Fusion 360 and STEP files included.
Printing
There are two options for the slide and head as I have included a layer to improve bolt hole quality. Those files carry the additional _hole_trick in the file name.
Hardware
- M3 Screws
- 16mm+ for clamp
- 8mm for fixing pen/pencil
- 2x 16/20mm for fixing slide to arm
- A pen or pencil.
- M3 Nut
- Glue (optional) would be useful to secure the nut.
Customization
The fusion file has two parameters:
- arm_length_cm: should be a whole number and dictates the length of the arm where you mount the pen.
- slide_height: mm value that dictates the height of the slide could be useful if you need a smaller one for tight spaces or a longer one for larger jobs and extra stability.