Bambulab X1C/P1S Rear Fan Bentobox Hepa Filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bambulab P1S/X1C Exaust Fan Hepa filter that use Bentbox 40x90x15 filter type
- Ocena
- 5 / 5
- Polubienia
- 127
- Pobrania
- 442
- Wydruki
- 4
- Wyświetlenia
- 4927
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I made an exhaust fan hepa filter holder for the bambulab printer that uses the same filter typer as the bento box air filter.
I bought the filter in a 10x pack and wanted to use the same filter also for the rear exhaust.
The holder is kept in place from 6 magnet 5x2mm.
I made also a file for TPU gasket, if you want to use the gasket i suggest to use the “gasket” model that have a bit less magnet dept to compensate gasket thickness.
For the holder I printed in PLA 0.20 layer, ironing 20% top surface for better adherence, no support needed.
For gasket printed in TPU 0.20mm layer 100% infill.