Filament runout sensor for 2040 extrusion (AM8)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament runout sensor for 2040 extrusion (AM8)
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 220
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I took the snap fit Denos filament guide design and the simple and effective eussrh runout sensor desing and made this thing. I wanted a runout sensor that could be attached to the top of the 2040 extrusion in my AM8 frame and that I could remove anytime I want. I only used supports on the bottom part to make sure the holes for the nuts and screws were right. You would need 3 M2 screws and nuts (12 or 16mm would do the work). My designing skills are pretty basic, that's why I decided to start with something proven and these two designs worked for me.
For more information on the filament sensor please visit eussrh design.
Print Settings
Printer:
AM8
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Filament: Amazon basics PLA
Notes:
Only support for the bottom part.