QUBE 500 PC 20x20 Box fan cooling mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mod to enable you to use a standard 20x20 office/box fan to cool your QUBE 500 case PC
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 735
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A simple 3-piece mod to enable you to cool your PC with a cheap standard 20x20in (50.8cm) box fan.
The design also doubles as a space heater in the winter working to keep your PC and you at a comfortable temperature all year round!
The files are easy to print and can be sliced according to your material and speed preference thanks to their simplistic design (as long as you enable supports) and should be done in no time!
All Files are ready to print, just make sure the print is oriented properly and enable supports on the build surface.
When printing please orient the files as shown in the ALL_BOX_FAN_COOLING_MODS STL.
All you need to do is print two of each part (2 base risers, 2 bottom clips, and 2 top mounts) and then attach it to your PC and box fan.
You might need to use scissors to cut some holes in the fan's plastic mesh to get the clips to fit but once you do you can the mounting clips to connect the fan to the PC case