Proto-Pasta 1KG AMS Spool Adapter with Centering Disc for Silica Gel Holder and Label
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AMS adapter for Proto-Pasta 1kg spools with centering disc for silica gel holder weights with option for label.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 399
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is an adjustment on my last remix of this Proto-Pasta spool design, but amended to fit their 1kg spools which have a different size carboard tube than the 500g spools.
Just like my last remix this design has a smaller center opening to accommodate the Adjustable Spool Holder for Silica Gel / Spool Weight by @humebeam. I also added various locations to hold the end of the filament when the spool isn't in use.
There is a version with a place to put a label as well. You can either print one of each version or two of either, whichever works for your needs.
Just like with the original design it's necessary to rip off the existing cardboard sides and insert these as replacements. It's a tight fit, so you may need to trim off the excess glue if there's a lot, but it definitely slots in there no problem with some force.
I will note that the Proto-Pasta 1KG spools are very full out of the box and I personally had to use the closer roller position on the Hydra AMS to give the feeder more room until the spool is slightly less full.
I no longer have an unmodded AMS I haven't been able to verify how these fit in it, but the diameter of the spool is the same as my 500g model.
Update: There is now a version 2 “Thin” model where the sides are 1 mm thinner that fits better in the Hydra AMS in standard position.