Raspberry Pi Camera mount (hidden cable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another Raspberry Pi Camera mount. I didn't want to see the flatcable. so the flatcable is inside, only comes out at…
- Ocena
- 4,5 / 5
- Polubienia
- 16
- Pobrania
- 130
- Wydruki
- 2
- Wyświetlenia
- 1294
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Another Raspberry Pi Camera mount. I didn't want to see the flatcable. so the flatcable is inside, only comes out at the joints. I made the flatcable black with a marker. The vertical "tube" is 2 parts and slides up and down to make it taller or shorter.
I printed the tube upright, using support (for the horizontal part) and a rafts (for the vertical parts)
Extra hardware:
2x M3 T-nuts (printed)
4x bolt M3-12mm
1x bolt M3-18mm
7x nut M3
Printed on a Prusa Mini+
Remake of https://www.thingiverse.com/thing:3188580 and inspirtation of many others.
Print Settings
Rafts:
Yes
Supports:
Yes
200
Infill:
15
Filament:
Prusament PLA
Category: 3D Printer Accessories