Wardrobe Rod Bracket/Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sturdy wardrobe rod holder.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 115
- Wydruki
- 3
- Wyświetlenia
- 384
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
The rod bracket from an old piece of furniture broke and couldn't withstand the weight I was putting on it, so I designed a sturdier one that matches the original version. The bracket can accommodate a 20mm rod.
Assembly instructions
3D Printing
You can use the following settings as reference:
- Material: PLA/PETG
- Supports: Yes/No
- Resolution: 0.2mm Layer Height (using a 0.4mm nozzle)
- Perimeters: 2
- Top Layers: 2
- Bottom Layers: 2
- Infill: 100%
Note: I decided to print the rod bracket on its side to provide more durability, but you can print it on its back without using any supports.
Tools & Supplies:
In order to accomplish the install of one rod bracket you will need the following:
- 2x | 3.5mm Wood Screws
- 1x | Screw Driver
Steps
Here's a step-by-step guide on how to install the wardrobe rod bracket:
- Begin by 3D printing the provided parts.
- Mount the rod brackets into your wardrobe using 3.5mm wood screws.
- Install the rod on the newly mounted brackets.
Feedback
Feel free to share any suggestions or ideas you may have for this project. Your insights are highly appreciated and will help me improve this project. Happy printing!