BaBo organizer more compact insert for glue 2x4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A more compact (2x4 instead of 2x5 units) insert for glue for the BaBo organizer system.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a module for the BaBo organizer. I'm not the original author of that system, just for this remix of the glue insert.
I wanted or more compact insert for the Bambu Lab glue sticks, so this one uses a 2x4 unit size to hold two glue sticks. Glue sticks can still be taken out easily by pressing down on one end, see photo (there are recesses for this at both sides).
The included 3mf should have all the settings necessary for a successful 2 colour print, I used lightning infill to reduce filament usage a tiny bit (doesn't matter much here as space between bottom and insert surfaces is small).