ATX PSU Front Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ATX fron panel fit on an old ATX PSU, nice to have in my lab. The PSU project is one of the many find on internet,…
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 1337
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
ATX fron panel fit on an old ATX PSU, nice to have in my lab. The PSU project is one of the many find on internet, personally i followed the @tartaglia project (thanks) and i added some modification.
Pay attention that the fan cut is based on my PSU that has the fan on the right
Regards
Jonweb
Updated 04/01/2021
added STL cover without the PSU fan hole
Updtated 05/03/2021
added STL for another ATX factor called HYPRO HP-D2808F3Pm bigger than the previous and new position of the screen and fuse holder holes on top
Print Settings
Printer:
Artillery Sidewinder X1
Rafts:
No
Supports:
No
Resolution:
0,20
Infill:
20%
Filament: GEEETECH PLA Strawberry RED
Category: 3D Printing