Fly ADXL Clamp Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small mount for clamping a FLY ADXL345 USB accelerometer to the print bed.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 138
- Wydruki
- 2
- Wyświetlenia
- 766
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Based on similar mounts. I made this clamping mount for a FLY-ADXL345-USB accelerometer because I wanted to also clamp it to my X-Axis gantry and I had limited space for only one screw.
Unlike other clamps it requires only a few 3M screws as the only hardware. All the holes are sized with tight tolerances as I didn't want to bother with heat inserts. A small drop of super glue will hold the pad onto the end of the 3M screw.
You'll need:
2 3Mx8 screws.
1 3Mx12 screw.
I also included the FreeCad file if anyone wants to edit or remix it.