Steering wheel wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simply wall mount for any steering wheels with a Momo/Sparco 6 bolt flange. Does not fit Nardi flange steering wheels.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 775
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a wall mount to display steering wheels on you wall and allow you to easily remove them. They should be deep enough to also allow you to put the horn and horn ring on as well. There are 4 flat backed holes for bolts and 2 counter sunk holes for screws.
The pre-sliced file is for a printer with a .6 nozzle. If you want to print from the 3mf files you need to print 5 pegs and one hook. When assembling the hook should be placed in the top hole. The pegs are pretty much just there for alignment but also it looks better with all of them.
For the hook: press it part way in then put your steering wheel on and see how you may need to adjust it in or out for it to fit best. Some steering wheels are made with different thickness metal or with different depth countersink. Once you get it right you can super glue it if you don't find the friction fit sufficient.