Polti Wheel replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wheel replacement for the Polti vacum cleaner
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the replacement wheel for the Polti vacum cleaner. The original was broken, and I created a new one and take the opportunity to learn better how to design objects with Shapr3D.
It should be printed in PETG or even better in TPU. Do not use PETG for high speed that seems like PLA and that has very few elasticity.
Print Settings:
- Perimeters: 4
- Infill density: 30%
- Infill pattern: Gyroid
- Generate support material: ON
- Support style: Organic
The first print was immediately broken since it break a thin part in the direction of the layer, so I added a enforcement structure. However I think better results on durability can be achieved by printing the wheel on the plate rotated at around 30° so that the layer force is not applied in the horizontal direction.
The part was created in Shapr3D.