Window Stopper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple window stopper, for keeping your windows fully open while ventilating your room
- Ocena
- 5 / 5
- Polubienia
- 148
- Pobrania
- 1024
- Wydruki
- 17
- Wyświetlenia
- 4017
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
The shape helps to keep the stopper in place, even if the window is moving due to wind. It can be used symmetrically.
I printed it in Armadillo TPU (https://ninjatek.com/shop/armadillo), a very hard TPU, but I think any material can be used.
To prevent damages on your window, while trying to close it with the stopper inside (this will happen sometimes at the beginning 😉), I recommend to print it in any kind of TPU.
It is 4cm wide at the thinnest point
UPDATE:
I made the outer wall a little bit thicker, so that when printed in TPU, it won't squeeze together but rather slide a little bit better up and down (hopefully)