Flexi Bowl - Christmas Candy dish
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Flexible bowl that can be used to hold candies or whatever you want for Christmas!
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 199
- Wydruki
- 1
- Wyświetlenia
- 1377
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution
This bowl was made to be printed in Vase Mode (or spiral mode, whatever your slicer calls it). It has alot of flexibility to it, but is not as fragile as many vase mode prints are. FYI--it is not meant for liquids or fine particles.
I wanted to model it as a large bowl, so the .stl may not fit on the bed in your slicer--but you can easily scale it down. The images i included are the bowl printed at 75%.
Printed with clear PETG, no supports needed really, but i did print mine with a brim. Should print just fine in PLA as well.
At 75% it took under 4 hours to print on my p1p.
I included a non-vase mode version as well, for those of you that want something more rigid. Just be aware it will take quite a while to print--17hrs at 100% size and 15% infill. I have NOT printed the non-vase mode version myself yet.