MUJI Cleaning System ACME adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Muji Aluminium Telescopic Pole has cracked and I can't be bothered to get another one, so I designed this
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 605
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My Aluminium telescopic pole for the Muji Cleaning System has cracked maybe due to excessive force applied onto the stick. I can't be bothered to get another one, as I believe it will crack again, so I decided to reuse my painter pole with the ACME ¾-5" broomstick thread.
This design is best printed horizontally, with the tab facing towards the print bed to avoid shear force being applied parallel to the layer adhesion. Due to the complexity of the design, support material is needed.
I've printed this successfully using eSUN PLA+ with 0.4mm nozzle, 0.2mm layer height with support enabled. However, IMHO I believe it might be better to use less rigid material such as PETG or Nylon to avoid cracking.