1 / 5
Tiny-M V5 Toolhead Shroud with larger cooling ducts — zdjęcie 1
1 / 5

Tiny-M V5 Toolhead Shroud with larger cooling ducts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tiny-M V5 toolhead with moar cooling ducts for increased part cooling airflow.

Ocena
0 / 5
Polubienia
11
Pobrania
85
Wydruki
0
Wyświetlenia
911
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

THIS PROJECT WAS HACKED TOGETHER IN TINKERCAD, SO THERE ARE NO CAD FILES.

If you haven't already started a Tiny-M V5, keep in mind that it is an incomplete project.  Some beta files are there, but there is no CAD file of the complete printer and you may have to modify parts or export stls from the CAD files that are there.  The only hotend mount that is included is for a Revo Voron.  If you want to use any other hotend, you will have to make your own carrier for it.  All the little hiccups made this build take a lot longer than anticipated.  If you want a better build experience, build the released V4.

The cooling ducts of the original fan shroud seemed way too restrictive to me and comments by others led me to believe cooling was lacking.  So I added some extra large ducts in addition to the original ones.  With 12,000 rpm GDStine fans, it seems to flow a lot of air and direct it to the right place, but I have not finished building the printer and have not printed with it yet.

I had trouble fitting the cooling fans in the original housing, so I added a little extra room for them.  The sides of the shroud seemed bulkier than necessary, so I also shaved a bit off and reworked the fan openings.

I don't plan on refining this any further.  Made it for myself and figured I'd share it.

The carriage for this toolhead fits a forward facing MGN12 rail.  I assume the belt spacing is the same as larger Vorons, but verify if you plan to use it on one.