Throwing Star LAN Tap Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of https://www.thingiverse.com/thing:240639 1st thing i changed is flatting the part. As i was having…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 94
- Wydruki
- 3
- Wyświetlenia
- 534
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of https://www.thingiverse.com/thing:240639
1st thing i changed is flatting the part. As i was having problems printing because the original had some spokes pushing out the bottom of the print.
2nd thing i changed was added more room for the RJ45 sockets. As mine where a bit to tight.
3rd thing i added was some text just to make it look nice. I have also uploaded the parts without the text if you like that more.
The case will will fall off. However i quick tap with a soldering iron on the holes on part 2 where part 1 slides in will lock it in place.
Category: 3D Printing