Rivet Gun Gridfinity Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tray to hold the rivet guns from the Yardstore and some bucking bars
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a gridfinity tray to fit any of the rivet guns that comes with the “737” kit from the Yardstore and maybe the Aircraft Tool Supply rivet guns. I need to verify that though. I modeled it specifically for my 4X gun but all the other sizes share the same handle. The only difference is the barrel length.
A large cut-out is provided for the tip of the barrel so a spring can be mounted on the gun while it is stored. I keep my quick-release spring mounted and I leave the honey-comb spring the the tray.
It also has storage for the two bucking bars that come with the kit.
I have a Snap-On ATI634T bucking bar that also has a slot in the tray. If you do not have this bucking bar, pick the "V2_No Tungsten" version.
Be warned this model uses a lot of filament unfortunately… around 350g depending on what type of infill you do.
Below are my settings
Printer: Bambu X1 Carbon
Material: PLA or PETG
Layer Height: 0.20mm
Infill: Grid, 8-10%
Walls: 2
Top Layers: 3
Print Time: 7hrs on standard print settings with a 0.6mm nozzle