Sonic Pad USB Stabilizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To keep the USB Connector in position
- Ocena
- 4,125 / 5
- Polubienia
- 99
- Pobrania
- 1268
- Wydruki
- 9
- Wyświetlenia
- 4520
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
As the USB connector on my Sonic Pad always moves a bit downwards, I decided to create this extension. It clips onto the pad (as well as possible with the low profile of the Sonic Pad):
The hole for the USB connector is made for this fabric-covered USB cable (see photo) and may not fit all other USB cables on the market. But using a file and bit time may correct this. I also added a STEP file to make it easier to adapt to your needs.
I printed in Nobufil matte black PETG (recycling material). PLA is not the best I think because it creeps under constant load (clip on springs) - but its cheap and easy to print, so try it out. :-)
update: added a dual-USB Version (because adding another printer)