萝卜蝴蝶刀(短款)Carrot Balisong(Short model)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
我在 TikTok 上看到了这个小玩意并决定制作它。 精致的萝卜蝴蝶刀。 I saw this gadget on TikTok and decided to make it. An elaborate Carrot Balisong.
- Ocena
- 5 / 5
- Polubienia
- 90
- Pobrania
- 389
- Wydruki
- 3
- Wyświetlenia
- 2097
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
您好,如果您打算下载此模型,请考虑留下赞、发布制作、留下评论甚至捐赠。谢谢!
Hi There, if you plan on downloading this model please consider leaving a like, posting a make, leaving a review, or even a donation. Thank You!
我精心设计了这把萝卜蝴蝶刀的所有细节,你可以在不使用任何额外支撑的情况下完美的打印这个模型,但是你可能需要用到4个M3*6的平头螺丝。其中你需要打印两个"叶子(短)"零件,总共是三个零件。注意:在打印的时候你可能需要注意“叶子(短)”的打印方向,将不需要支撑的面做为底面。
I have carefully designed all the details of this Carrot Balisong so that you can print this model perfectly without any additional support, but you may need to use 4 M3*6 flathead screws. In which you need to print two "叶子(短)" parts, for a total of three parts.Note: When printing, you may need to pay attention to the printing direction of the "叶子(短)", using the side that does not need support as the bottom surface.