Maple leaf ice hockey mouth guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As a joke for a colleague who moved to Canada, I created a red/white mouth guard with a maple leaf in it.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 207
- Wydruki
- 0
- Wyświetlenia
- 847
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed it in three pieces, since I did not own one of these brilliant multi-filament switching devices … yet. But it should be possible to run it on a Prusa with MMU. You do have to adapt the design to accommodate this, though.
However, I chose to print it in three pieces and glue them together. There are small dowels and holes to easily line up the pieces for glueing. However, if you print the whole thing rotated on its side, it should be possible to print it with pauses in between the parts to switch filament.
- printed on Ultimaker Original in PLA
- 0.15 mm layers
- 200°C nozzle
- 60°C bed