1 / 2
Adapter for festool vacuum hose to HT DN50 bushing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to fit a festool vacuum hose to a HT DN50 pipe bushing
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 401
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (20)Powiązane
Adapter to fit a festool vacuum hose to a HT DN50 pipe bushing.
Filament: extrudr greentec pro (PETG should also be fine)
Print settings:
- layer height: 0.2
- wall loops: 3
- Top/bottom layers: 5
- infill: 25% rectilinear
- support: no
