1 / 1
Feet for Ikea Skadis board (15° tilted)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These feet hold a heavily loaded Ikea Skadis peg board upright at an 15° angle for presentation purposes.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 110
- Wydruki
- 1
- Wyświetlenia
- 782
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (22)Powiązane
These feet hold a heavily loaded Ikea Skadis peg board upright at an 15° angle for presentation purposes. They're quite big on purpose, so that a lopsided board won't fall over. The feet are screwed to the board by using two counter sunk M4x20 bolts. There are also three M4 threads on the bottom to optionally screw the feet to some surface or add rubber feet.
I've printed mine using PLA and no supports are required.