1 / 4
MMU Remix Galleon Flying Fantasy Ship Model Compatible With DnD Spelljammer — zdjęcie 1
1 / 4

MMU Remix Galleon Flying Fantasy Ship Model Compatible With DnD Spelljammer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

MMU Remix Galleon Flying Fantasy Ship Model Compatible With DnD Spelljammer

Ocena
0 / 5
Polubienia
5
Pobrania
37
Wydruki
0
Wyświetlenia
451
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I printed two side by side on my Bambu with 0.85 flushing volumes and a prime tower.  

You may want to reduce the flushing volumes ratio in either Orca Slicer or Bambu Studio if you want to intentionally bleed some colour into the sails for white/dark brown.

If you don't have light brown as well as dark brown PLA then just set both browns to the same filament in your slicer; it's only the deck which is a light brown c.f. the ship hull and struts in chocolate brown.

NEEDS supports.  I used 30% overhang threshold in Bambu Studio with auto tree supports which are super easy to remove once printed without worrying about snapping the whole model to pieces; as long as you aren't too rough with the result of course!

Tagi