Oxford Hotgrip Control Mount for Left Handlebar, Honda NC750 DCT, 22mm handlebar (stock)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A space-saving mount for the NC750 DCT that tries to work around the narrow space next to the parking brake.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 604
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
The Honda NC750X DCT has a parking brake on the left handlebar and a nonstandard mirror mount, so the stock Oxford Hotgrips controller mount will not fit on the bike in that location. Certain work-arounds common to owners of that bike are unsatisfactory to me, so I tried to come up with a solution to keep the controller somwhat near the left hand side, but still not get in the way of the function of the parking brake.
I haven't had this mount on the bike yet, so I'm not sure if I succeeded or not.
Printing suggestions:
- I use PETG for stuff like this.
- I don't like to trust entirely to inter-layer adhesion for clamping gadgets, so I would print the bottom part of the ring on its side so that the direction of perimeters and faces is circumferential, continuous strands. Supports may help to get the holes rounder, but they complicate assembly afterward.
- 1.5mm minimum top and bottom thicknesses
- 4-5 layer perimeters
Assembly:
You'll need a pair of m5 hex head screws. I tap the plastic with an M5 tap on the platform side, and screw the hex heads directly into that. PETG takes a thread this size pretty well, and it holds the screws like a nylock nut, in my experience. If you'd rather use a nylock nut, use longer screws (20mm) and locknuts. You'll have to print the nut version of the platform model.