Lattice Vase
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lattice perimeter wall structure designed to print in vase mode
- Ocena
- 5 / 5
- Polubienia
- 82
- Pobrania
- 390
- Wydruki
- 1
- Wyświetlenia
- 1833
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by the FullControl GCode Designer, I wanted to experiment with designing models for slicing to achieve super precise and strong parts.
The lattice drastically improves vase mode layer adhesion and part strength by sandwiching alternate layers together, plus it gives such a clean exterior finish.
Parametrically modelled in grasshopper so I can pre-slice any shape to print like this (with or without a twist) - happy to take suggestions.
PRINT SETTINGS //
Printed using the new alpha input shaper 5.1.0 for the Prusa Mini
0.2mm (Speed) Profile
Vase Mode
2 Bottom Layers (OPTIONAL) - If not, add a brim
PolyTerra PLA
I would recommend tuning the print after the first couple layers to max speed (255%) and max flow factor (150%) for a faster, better looking print.
It would be great to see an option in prusa slicer to generate perimeters like this, it feels like a better version of fuzzy skin.