1 / 2
Compliant Half-Size Blaster for 0.6mm nozzle.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OpenSCAD file that modifies the "One Piece Compliant Blaster" to provide a more reliable trigger lock with 0.6mm nozzle.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 65
- Wydruki
- 1
- Wyświetlenia
- 1036
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This adds some small modifications to the BYU "One piece compliant Blaster” so that the trigger mechanism is more positive locking and less likely to accidentally trigger.
I needed this modification when printing with a bigger 0.6mm nozzle that rounds the corners of sharp edges more.
To apply, download the original “Nerf - Halfsize.stl” from 540528 printable and then run the OpenSCAD program provided here which loads this file and adds the mentioned modifications.