Audi S3 8V Paddle Extensions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Paddle shifter extensions for Audi
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 356
- Wydruki
- 2
- Wyświetlenia
- 1677
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I made these to fit my 2020 S3. They work perfectly on it!
This is designed to use M3 X 20 hex socket head screws and M3 nuts to help clamp it tighter to the stock paddle.
Some websites say that other models might have the same paddles. I do not know FOR SURE but these are some possibilities I've seen"
2016-2020 A3, A4, S4, A5, S5 and maybe even some R8.
Many plastics will warp in a hot car! PLA won't work at all. PETg probably won't. I've even had ABS paddles start to sag but other parts I've printed in ABS do ok in the car. I printed these ones in PC.
ALSO - The vertical lines are on purpose. This is from printing them face up which makes it sit at an angle and then having “ironing” turned on.