Maker's Muse Wobbly Wheel Robot Wheel Design By 3Drcnc
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on a Maker's Muse "Competition" for the best wheels for his wobbly wheel robot. These are not that wobbly though
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 643
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is my take on the challange to design the best wheels for Maker's Muse wobbly wheel robot. (They don't actually have to be wobbly.)
I went for a more traditional wheel design but with only the ridges being solid. This is to keep it under the 2500mm2 that the contacting surface can't exceed. These are actually only 2000mm2 so they could probably be optimised if they are shown to be good. I didn't see any other rules so I guess they should be a viable option.
If you haven't checked out Maker's Muse video on his wobbly wheels robot definitely do. It was one of the best and most interesting videos I've seen on YT in a while. Satisfying!
(These are NOT tested) Preferiably printed with a 1mm nozzle for strengt and reduced print time.
I decided not to have the hex mount in the center of the wheel since I don't know the other measurements of the vehicle.