Lerdge iX Mount for Fanless Power Supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fanless power supply mount for 3D printer Lerdge iX
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Since I found the original power supply that came with the Lerdge IX to be extremely loud, I looked for a fanless alternative and found this affordable model. This required designing a new mounting solution. In the process, I integrated a way to install a USB socket, which I connected to the power supply with a 5V voltage regulator. This allows me to power my Raspberry Pi Zero 2, which is needed for Octoprint, directly from the printer's power supply. Therefore, I also added a mounting option for the Pi below the power supply compartment. To secure the Pi, the cover for the power supply housing, and the cover plate for the USB socket, a total of 10 M2 threaded inserts with their corresponding screws are required.