1 / 3
Carpenters center finder for up to 6 inches — zdjęcie 1
1 / 3

Carpenters center finder for up to 6 inches

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Carpenters center finder for up to 6 inches with 1/8 inch incremental markings

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
237
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Center finder with a straight edge (with built in storage) to use for measuring out in 1/8th inch increments using a carpenters pencil (thus the bigger holes). 

I printed in PLA at .2mm

There are two versions, one with M4x20 screws for added strength:

  • CenterLineMain.stl
  • CenterLinePeg.stl

And one fully printable with threads:

  • CenterLineMainNoHW.stl
  • CenterLineNoHWPeg.stl

The storable straight edge is the same for both:

  • CenterLineStraightEdge.stl