basic holder for Skoda 1Z Octavia II and similiar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for something for the small bottle holder in the middle. For e.g. larger bottles or something very different.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 710
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi,
one of the first things I did with my new printer: a basic beerholder, which needs no screws (inside the car) but can be changed for other holders or organizers.
The base should be tested. In Winter it fits perfectly but in summer the beer had too less tolerance and erverything came out. Perhaps I will reprint it with 0.05% upscaling or a little more space for the beer.
Used PLA and everything was just fine. No harsh brake did move any of the super important fluid of the (of course) non-alcoholic beer.
Don't drink an drive!
Screwed together with 4x M5x20 hexagonscrwe and 4x M5 hex nuts.
Printed:
1x SVOE0.000.001-0009 Base (ca 7.9m filament/23g)
Beer holder printed:
1x SVOE0.000.001-0014 Holder V3 (ca 18m/54g)
3x SVOE0.000.001-0015 Feather V3
Optional printed:
4x SVOE0.000.001-0007 ScrewCap
1x SVOE0.000.001-0013 CapHolder
enjoy.
ah PS:
I have a Skoda Octavia II Facelift (2009-2013) [1Z5]. I am pretty sure every model from 2003-2013 in the Octavia II family should work. Perhaps Fabia and Superb, too, but can't check that.