1 / 6
Safariland ALS, Molle Micro Battle Belt type, belt loop — zdjęcie 1
1 / 6

Safariland ALS, Molle Micro Battle Belt type, belt loop

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is designed to allow the Safariland ALS holsters to be used with the half size molle loop type micro battle belts.

Ocena
5 / 5
Polubienia
43
Pobrania
419
Wydruki
3
Wyświetlenia
1691
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This belt loop allows you to mount a Safariland ALS type holster to micro battle belt.  This is for the belts that have 2" molle web sections.   

These belts typically have 2 half inch molle rows with a 1 inch space between them. Here is an example belt: https://volundgearworks.com/product/2-micro-battle-belt-v2/

 

Print this in PLA or PETG using the infill amount of your choice.  I printed one using PLA with 100 percent infill then tried to destroy it. It was surprisingly strong.

 

The STL file has the part positioned in the optimal orientation for 3d printing.  There is a built-in support between the molle loops that will need to be broken out and thrown away after printing.

 

It should assemble using standard 4mm size Safariland T nuts and screws that come with als and qls accessories.  I have included a .stp file, in case you would like to modify the design to use different screws or to fit different molle styles.