Shark Vertex Pro: Wall Mounts for Vacuum Attachments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mounts for the Vacuum Attachments from the "Vertex Pro" Shark Vacuum. Meant for use with 3M Command Strips.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 156
- Wydruki
- 1
- Wyświetlenia
- 1394
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
There are 3 attachments that come with the Shark Vacuum Vertex Pro. These models should allow you to conveniently mount all 3 to your wall so there is no more need for rummaging around trying to find where you tucked away that attachment.
As an added bonus the attachments even click and lock into place on the wall mounts, just as they do on the actual vacuum. Simply press the release button and lift up for quick access.
- For the short attachment, just print the normal mount at 100% scale.
- The longer straight attachment is slightly larger so just print the same normal mount at 100.5% scale for that one.
- Finally for the bent attachment, print the sideways mount at 100% scale.
I printed these with Cura's Tree supports and it made for a super easy removal, but you could certainly try printing without supports if you are confident in your printers bridging and overhang abilities.
These wall mounts are meant to be used with 3M command strips, which allows for a very simple mounting process.