BigTreeTech TFT24 Angled Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the angled case for the BTT TFT24 mounted on a standard 2020 extrusion
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 696
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I'm not sure if maybe they changed the board design of the TFT24 but the original case by @sdedux over at thingiverse did not fit my display. The reset button was off by a couple of millimeters and so i hat to slightly modify the case for this print. (and yes my board also had v1.1 written on the silkscreen)
Uploading it so that hopefully i save someone else from having to to the same :D
If you are unsure if this will fit your display you could try and just print a layer or two of the case and test if the cutouts seem to match your board layout.
Remixed from: https://www.thingiverse.com/thing:3966593