Suction strainer for Sunsun aquarium filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement suction strainer for Sunsun HW-702B filter. Will work with other filters with 17mm outer diameter tube.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 280
- Wydruki
- 0
- Wyświetlenia
- 1096
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement suction strainer for the Sunsun HW-702B aquarium filter. The original can be easily damaged when used in an aquarium with turtles or other pets which are stronger than fish.
It should work with other filters that use the 17mm pipes and 5/8" hoses system. The inner diameter of the suction strainer is 17.3mm at the entrance and 16.9mm at the bottom to allow some imperfections in the printing process and still fit and hold to the pipe.
Changes from the original:
- The shape is less round (while maintaining the original 90mm length) to get a flat bottom for vertical printing.
- Less round shape also allowed longer slits with greater filtration area to minimize clogging.
- There is a ring in the middle of the slits to increase overall strength and to reduce vibrations of those pillars while printing.
You can also use the attached .f3d file to create a custom length version if the original 90mm does not suit you.