Leaf Basket for Hayward pool pump
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement leaf basket for Hayward model pool pumps
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 466
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is a replacement Pump leaf basket for Hayward brand pool pumps.
I go through a LOT of these baskets thanks to the amount of leaves that end up in my pool so I decided to make my own so I can just print another when one breaks.
All of the parts are designed to lay flat on the build plate to minimize supports and give it more strength.
Most everything interlocks together but this is one of those prints which will benefit from being glued together.
To assemble first slot both the left and right sides into the front face then slide the back on and finally press the bottom into place there are two retaining clips to hold it while the glue dries, and last add the top ring.