Epson Perfection V550 Lid Hinge Pin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the hing pins used to attach the flatbed lid to the body of the Epson Perfection V550.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement for the hing pins used to attach the flatbed lid to the body of the Epson Perfection V550. The scanner uses two of these that appear to be identical. I suspect this will also fit the V500 and v600 since they are similar.
There are some minor differences from the original; this version has a solid body while the original had cutout's. The solid body makes it easier to print.
Due to the odd shape this will require some supports. Supports can be minimized by flipping the model upside down.
You may notice that the original piece is very stout and wonder why this would ever need to be replaced. This scanner was stored on top of an 8' bookshelf and apparently the cat did not appreciate this. Other than a single broken hinge pin and a small crack in the body the scanner survived it's flight quite well.