1 / 6
Food scale monitor tower base replacement piece (with video) Elicom EVL+model LF 3/6 kg (works on others) — zdjęcie 1
1 / 6

Food scale monitor tower base replacement piece (with video) Elicom EVL+model LF 3/6 kg (works on others)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My local mom n pop bakery was struggling, using this busted up scale, held together by tape, couldn't take it anymore.

Ocena
0 / 5
Polubienia
4
Pobrania
16
Wydruki
0
Wyświetlenia
190
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The part replaced clamps down on the tower shaft of  the monitor, the threads printed in their usual orientation would break from the force, so instead they're printed separately in a stronger orientation then slide into the base.

Printed in PETG 0.15mm, I've rubbed a dry bar of soap over the threads and inside the cap that screws over them to assure no layer line friction or jam.

Showcase video then part of the assembly:
 

Tagi