Gunpla Nipper Holder x2 - Gridfinity Refined
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gunpla Nipper Holder on a Gridfinity Refined Base
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 1180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Nipper Holder for 2 Godhand Nippers, side by side (such as the PN-120 and the SPN-120).
The top of the holder has space for two 8x3mm magnets, to help ensure that the Nippers don't slide off. The bottom of the base also has a lip (not pictured) to also help this from occurring. The top also has a 2mm divot in it, so that you can cut some soft foam and put it there to help ensure that the blades don't get damaged.
The spike in the middle is to help align the nippers, while the divots in the side are so that it's easier to grab the nippers off of the holder.
The back of the holders have a small tower that is the perfect size to hold the blade protectors when you're using the nippers.
It's built on a Gridfinity Refined base, which is based on Gridfinity by Zack Freedman.