Grommet for internal cable routing in NS Fuzz 2020
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for the original grommet that protect the break- and rear shifter hose from wear
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 464
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
A replacement for the original grommet that protect the break and shifter hoses from wear when routing it through the bike frame.
When I rebuilt my bike I couldn't find the original parts anywhere for purchase, so I decided to design my own grommet. The fit is very tight and I would recommend to use a pick to make sure the entire inner flange is situated correctly.
Print in TPU or any other flexible material. Make sure you have good layer adhesion, otherwise the print might delaminate between the inner flange and the main body when you install it.
If you have issues printing flexible materials, it's possible to print it in ABS as well, but then you need to remix it and remove the inner flange and instead glue it to the bike frame. I wouldn't recommend PLA since it degrades over time when outside.