Prusa Printer Monitor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I built an Arduino-Printer-Monitor working with my Octoprint. I needed a case for it - so I designed a little printer.
- Ocena
- 5 / 5
- Polubienia
- 122
- Pobrania
- 117
- Wydruki
- 8
- Wyświetlenia
- 3798
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Last weekend I found a webpage with an instruction on how to built an Arduino-Printer-Monitor working with Octoprint. https://github.com/Qrome/printer-monitor
Since I had an Arduino NodeMCU ESP 8288 ( https://www.makershop.de/plattformen/nodemcu/nodemcu-cp2102/ ) laying around here, I tested to install the code on this board. I also had a small 0,96" OLED-Display ( https://www.makershop.de/display/oled/096-zoll-oled-ssd1306/ ), which is used in this project.
The steps on how to do the programing parts are described very good on the page above. After 2 hours of reading and installing everything worked fine.
After this I needed a case for it - the cases on the github-page doesn´t fit to my board, so I designed a case on my own … a little printer :-)
The parts can be printed without any support. Only the small case for the display needs some (automatic) support. Later on I will upload my presliced print-files.
I printed on an Prusa MK3S+
- the black parts with PLA Prusament Galaxy Black
0,2mm Quality-setting
- the orange parts with PETG Prusament Orange
0,2mm Quality-setting
Add the parts together with some glue.
The small benchy is not in the files-folder. Use the original files ( https://www.thingiverse.com/thing:763622 ) and scale it down.
Feel free to build your own tiny Prusa Printer Monitor