Snapmaker 2.0 A350 enclosure sliding door handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
sliding door handle for Snapmaker 2.0 A350 enclosure. Version for M3 screws (I used M3x20) and version without screws.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 117
- Wydruki
- 1
- Wyświetlenia
- 903
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Two version of sliding door handle for Snapmaker 2.0 A350 enclosure - version for two M3 screws (I used 2x M3x20 screws - sufficient strength for PLA) and version without screws (not to use PLA - very fragile. ASA/PETG/etc is better). The rigidity enough to do without that glue
The photo shows the draft printed versions from the some testing pack of silver PLA...
After the appearance of these handles on the sliding door, it became much less common to wipe the doors and the very process of opening the enclosure became very comfortable.