Gridfinity 2x2 and 1x2 bins for 1 oz Bob Smith Industries CA bottles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Variation of openSCAD file gridfinity_glue_stick.scad from Jamie designed to hold Bob Smith Industries 1oz bottles.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
A minor remix of Jamie's Gridfinity openSCAD glue_stick holder, so they can hold 1 oz bottles of Bob Smith Industries CA glues.
I'm new to openSCAD, and my changes were brute force and may break if you try parametric changes in the openSCAD models.
I'm attaching the bins to a 2 x 3 screw-together base designed by Kyle Warren: https://www.printables.com/model/300603-gridfinity-screw-together-baseplate/comments/1145753 .
The bins and base were used in the project described here: https://www.macmodeler.net/ramblings/2023/10/6/modified-a-ca-glue-holder
The bins were printed on a Prusa XL using Keene Village Performance PLA. While more expensive, the KV performance PLA has superior heat deformation properties, 144 C vs. 55 C for regular PLA.
They can be easily printed at your favorite print settings. The settings I used were:
- 0.6 mm nozzle
- 0.25mm Quality
- no supports
- no brim
- 20% infill