Customizable Blokus Piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My family had a Blokus set missing a piece. Someone else thought I might be able to 3d print a replacement, which I…
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 559
- Wydruki
- 4
- Wyświetlenia
- 3479
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
My family had a Blokus set missing a piece. Someone else thought I might be able to 3d print a replacement, which I can. I thought it was really cool that someone else thought of that though.
I found some pieces on thingiverse, but they were a different style, and measuring them, they were slightly smaller than what I have. I took some measurements from another piece and recreated a single square unit in openscad. Then I made a function to easily translate that a number of units in x and y, so you can build any piece you want.
If you're feeling adventurous, maybe you could print all 35 hexominoes.
Print Settings
Notes:
I printed at .2mm layer height since that was an even divisor of the thicknesses I needed.
I printed with a translucent green PETG to try to get close to the original.
I used no supports, though maybe I should have.
Category: Toy & Game Accessories