Ariens Snowblower Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement knob for Ariens Snowblowers, part number: 07509600 (maybe, not 100% sure) here's a link to buy one,…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 471
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Replacement knob for Ariens Snowblowers, part number: 07509600 (maybe, not 100% sure)
here's a link to buy one, they're $24.55 currently (!): https://www.repairclinic.com/PartDetail/Knob/07509600/1770004
I bought my snowblower and it was missing the knob to rotate the chute. The shaft is 3/8" diameter. I bought a 3/8" push nut at the local hardware store for 30¢, and printed the rest. filament cost: $1.05. I saved $23 printing this vs. buying it. The code (sans variable definitions) is roughly 40 lines. That's over 50¢ saved per line of code!
The gear shifter knob on mine appears to use a larger shaft, so double check the shaft size before you print. You can easily tweak the scad file to adjust the size.
I printed the parts as oriented, with support for the knob. I would recommend having your support alternate directions, part of my support fell over while printing (print still succeeded though, can't even tell there was a problem).
Category: Replacement Parts