1 / 2
Bond of Union by Escher - HueForge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bond of Union - M.C. Escher (1956)
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (27)Powiązane
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Army Brown Transmission Distance: 0.3
PLA PolyLite Natural Transmission Distance: 21
PLA PolyLite White Transmission Distance: 5
Swap Instructions:
Start with Charcoal Black
At layer #7 (0.64mm) swap to Army Brown
At layer #10 (0.88mm) swap to Natural
At layer #18 (1.52mm) swap to White for the rest.