1 / 3
WIP Respirator Body with 3x NATO Ports
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A prototype half face respirator body with 3 nato ports
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 492
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (25)Powiązane
This is a prototype half face respirator with 3 NATO ports. It can be heat formed with a hair dryer to form a decent seal. The goal was to add a mold for using caulk/silicone to make a compliant seal but the project is shelved for now.
For the fully 3D printed exhale valve, see this model: https://www.printables.com/model/157730-fully-printed-one-way-respirator-exhale-valve-w-na